Hi there, In today’s post we’re going to reveal the best primeweld cut60 for this year based on a lot of factors and the in-depth research we did on the market.
If you are in a hurry then here is a quick summary:
Our Picks For primeweld cut60 [Comparison Table & Our Score]
Top 10 Best primeweld cut60 [Products Features Revealed!]
Cool! Now that you have an idea about the products we are going to reveal in this blog post. let’s take a closer look at each pick, its specifications, and its features.
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
$379.00 in stock
- Non touch pilot arc plasma cutter: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- Output and performance: 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- The compactible consumables set, for this Brown Color LTPDC2000D Plasma Cutter are "PCS22" or "PCS33". Please search "Lotos PCS22" or "Lotos PCS33". It CANNOT compatible with Lotos PCON40 or PCON90 Consumables Sets or any other third part consumables set
- Buy with confidence: we offer 30 days refund :us based customer care & support team: please feel free to contact us by phone or email, we always stand back on our products. please submit the registration form on our website
- 50 Amp Digital Inverter Air Plasma Cutter
RX WELD 23pcs Plasma Cutting Torch for harbor freight 62204 IPT-60 PT-60 IPT-40 PT40 Tip 0.039'' 1.0mm Electrode Shield Cap Stand Off
- Package Including: 10pcs Electrode + 10pcs Tip + 1pcs Plasma Cutting Shield Cap + 1pcs Plasma Cutting Stand-Off+ 1pcs Swirl Ring
- Suitable for PT-60 PT60 IPT-60 IPT60 / PT-40 PT40 IPT-40 IPT40 series plasma cutter torch
- These plasma cutting torch consumables are replacement parts, not original.
- 100% brand new and high quality Durable and reliable to use.
- gives welders an comfortable feeling during the welding job.
YESWELDER TIG-250P 250 Amp AC/DC Aluminum Tig Welder with Pulse, Digital Inverter Tig/Stick 220V Welding Machine
- Software Controlled Square Wave AC/DC TIG inverter welder(Foot pedal is not included inside product)
- Digital set of Pre Gas Time, Start Current, Up Slope and Down Slope Time, Finish Current Level and Post Gas
- Time with the choice of 2T or 4T trigger function allows control of the welding process at a professional level from start to finish.
- Autosaving of welding parameters while power off.Auto recovery of last time’s welding parameters.
- Unique air channel design increases the heat dissipation of the power device, control circuits, minimizes dust absorption, thereby greatly improving longevity and reliability.
Weldpro Digital TIG 200GD AC DC 200 Amp Tig/Stick Welder with Pulse CK 17 Worldwide Superflex Torch 3 Year Warranty Dual Voltage 220V/110V welding machine
$920.00 in stock
- Weldpro's flagship 200 amp AC/DC TIG welder that goes beyond simply welding steel and aluminum. AND NOW WITH A FULL 3 YEAR WARRANTY!
- The model 200 is also a digital designed TIG welder equipped with full function TIG welding features found on machines priced much higher.
- Start and end amps, upslope, downslope, fully adjustable pulse, AC balance, AC frequency. 2T-4T
- Excellent Professional design rocker style foot pedal without annoying intermediate amperage control. And now available with the optional CK Worldwide superflex cable and flex head number 17F torch with independent trigger switch.
- Also fully capable MMA stick welding function with stinger included.
LOTOS TIG200ACDC 200A AC/DC Aluminum Tig Welder with DC Stick/Arc Welder, Square Wave Inverter with Foot Pedal and Argon Regulator 110/220V Dual Voltage Brown
$558.73 in stock
- Aluminum Welding--200A Ac Square-Wave Inverter For Accurate Aluminum Welding
- Rated Output: Maximum 200Amp Ac/Dc Tig Electric Current Output; Quality Tig Welding On Aluminum, Stainless Or Steel And Precise Welding Of Thinner-Gauge Materials; Power Efficiency: 80%
- Country Of Origin : China
- Stick/Mma Welder: 15-200Amp Dc Stick/Mma Electric Current Output; Easy Arc Start, Stable Welding Arc; Deep Weld Pool And Beautiful Welding Shape; Adjustable Hot Striking Arc Current Which Can Greatly Improve The Arc-Starting Function; Suitable For Welding With Different Kinds Of Acid Or Basic Electrode
YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved
- Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- Built-in Post Flow：When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
- Powerful Cutting Ability：10-55 A DC output, 1/2”ideal clean cut and 3/4”maximum severance cut under 220/240V，60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- Lightweight and Portable：Allows for connection to 110- or 220-volt receptacles without tools，Portable in the shop or at the job site—at 13 lb the shoulder strap allows the end user to easily move from location to location
- Added Safety：Certificated by ETL，Automatic compensation for voltage fluctuation, over current protection, over load protection,temperature control
Forney Easy Weld 140 MP, Multi-Process Welder
$409.00 in stock
1 used from $358.25
- MULTI-PROCESS WELDER- 3 in 1 Stick Welder, MIG Welder and DC TIG Welder (Accessories for TIG Welding not included) everything you need in one machine
- EASY TO USE- Easy start makes every strike EASY! Three position switch allows you to change process quickly
- CONTROL YOUR WELD- Infinite voltage and wire feed speed controls allows you to dial in the perfect weld. Rated output voltage range- 12 - 23V. Rated output current range- 43 - 110A. Full output curren range- 10 - 140A
- RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire. Full metal wire drive assembly
- WELDER INCLUDES- 10' MIG gun, 8' electrode holder, 8' ground clamp, Integrated handle with torch wrap, 20A - 15A adapter and one additional .030" contact tip. Backed by a 12-month warranty
Forney 291 Easy Weld 180 ST 120V/230 V Welder
- POWERFUL- Welds up to 1/2" Mild Steel - amperage range: 10-90 amps for 120 volts; 10 -180 amps for 230 volts
- DUAL VOLTAGE-120/230 input power and adapter
- VERSATILE- Easy Start Technology makes every strike easy and eliminates the frustration of your electrode sticking. DC Stick and TIG welder
- RUGGED- All metal case that’s built tough to take on wear and tear
- GENERATOR FRIENDLY- Extremely stable arc even off a power generator
Mellcom CUT50 Welding Machine, 50 Amp Plasma Cutter 110/ 220V Dual Voltage 1/2 Inch Clean Cut Portable with LCD Display Cutting Machine
- PLASMA CUTTER: Under 25 Amps DC output current, 60PSI, it can ensure an ideal clean cut of 8mm, a maximum cutting thickness of 12mm, and maintain efficiency above 85%. This machine comes with PT-31 torch, which is very suitable for cutting and piercing thin metals.
- MULTI APPLICATIONS: MELLCOM plasma cutter is specially designed for cutting stainless steel, alloy steel, low carbon steel, copper and aluminum and other metal materials. It can effectively cut rough, painted and rusty surfaces, and generates the least slag. It provides better cutting quality while ensuring a longer life of wearing parts.
- PORTABLE & USABLE TOOL: This welding & cutting equipment is small, compact in structure, and has excellent current output performance. Lightweight 15 lbs. Easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project.
- WHAT YOU GET: We have equipped this electric welding machine with more excellent product accessories-1 x AFR-2000, 1 x PT-31 Cutter Torch, 1 x Earth Clamp, 2 x Brass Fittings, 1 x PTFE Sealing Tapes, 4 x Hose Clamp, 2 x Nozzle, 2 x Electrode, 4 x Ceramic Ring, 2 x Ceramic Cup, 1 x English manual.
- QUALITY ASSURANCE: We will provide quality assurance for every product. In the event of product damage or missing parts, please feel free to contact us and we will solve it for you within 24 hours.
TOOLIOM 200A MIG Welder 3 in 1 Flux MIG/Solid Wire/Lift TIG/Stick Welder 110 / 220V Dual Voltage Welding Machine
- Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.
- Multi-functions in one machine: Suitable for MMA, Lift TIG, flux MIG, gas MIG
- Powerful Machine: Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate.
- Big enough to apply to 2 and 10 pounds rolls of wire. Ready to feed .030"(0.8mm) with solid core wire, and .035" (0.9mm)with flux core wire.Can Handle E7018 basic electrode.
- Dual voltage input design: Welding machine can be plugged into 110（120）V / 220(230)V dual voltage (Automatic fitting).